Quick connect fixture for use with 100 series shades. Pictured with G112 (Coste) shade in blue (sold separately). Requires SADP for connection to linear system track. Uses 1 X 50W max MR16 bulb with protective glass lens. 2"" stem with 3"" max extension; 1"" diameter. [Read more]
Pictured in white. Suitable only for 3-wire (H-type) line voltage track heads. W.A.C. Lighting Models: H18 H24 H36 H48 track lighting > components and accessories [Read more]
""L"" connector for two circuit system. Looking at the track from below, with the live-end connector at the 6 o'clock position, and the L-connector inserted at the opposite end (the 12 o'clock position) this connector bends to the 3 o'clock position. [Read more]
Ceiling Suspension Kit (2-48"" Aircraft Cables, Canopies And Parts). Used with 4 or 8 track carrier (sold separately). Powered from a remote transformer through a live end connector. Adaptable to T-bar ceiling using two clips under each canopy. Works on sloped ceilings. UL and CUL listed. [Read more]
Floating Canopy With A Built-In 150W Electronic Transformer, Conceals Junction Box and Live End Connections (Requires Use of one or more ""SLE"" Live End Connectors) [Read more]
Floating Canopy Without Transformer, Conceals Junction Box and Live End Connections (Requires Use of one or more ""SLE"" Live End Connectors) [Read more]
Jumper Set (Use as a Bridge or Flexible Connection. Between Runs That Prohibit a Continuous Run) Equipped with 12"" of ""Jumper"" Wire Which Can Easily Be Shortened or Lengthened in The Field. To Lengthen Use 12 Gauge Wire. [Read more]
Live End Connector Box BX/ROMEXeg;. (For Remote Transformer Applications Where BX/ROMEXeg; low volt non-metallic building wiring is Required.) For Use with SLE. (Purchase Separately) [Read more]
