Four inch incandescent step baffle with white trim, adjustable to 35 degrees from vertical. Uses 45W max PAR16 or 50W max PAR20 bulbs (not included) with IC rated housings (R4VI-B-ICA). Not for use with with non-IC-rated housings. 4.5"" Overall diameter. Compatible housings, purchased s... [Read more]
Housing with magnetic transformer, suitable for new contruction applications. Maximum 75W. Thermally protected. UL listed for branch circuit wiring. Socket included with housing. For new construction applications or dropped ceilings with ""T"" bars. Pre-wired integral magnetic... [Read more]
Five inch incandescent aperture cone with white trim, adjustable to 35 degrees from vertical. Uses 75W max A19 or 75W max PAR30 bulbs (not included) with non-IC rated housing (R5VI). Uses 50W max PAR30 bulb (not included) with IC-rated housings (R5VI-ICA or R5VI-R-ICA or R5VI-S-ICA or R5VI-S-R-IC... [Read more]
Design by Metis, 2003. Modular system for indoor applications, suitable for walls and flat surfaces where a wall washer light emission is required. The asymmetrical design of the reflector provides excellent wall washer light emission and hides the lamps, thus avoiding a glaring effect. Body in a... [Read more]
For undercabinet installation only. Used with remote electronic transformers (not included). Socket included. Maximum 35W. Compatible trims, purchased separately, are shown below in the Related Items section. [Read more]
Low voltage remodeling style housing with integral electronic transformer for cabinets, displays, soffit and similar low profile applications. Electronic transformer for 12V MR16 lamps, 50 maximum, lamps are not included. Non-IC rated, insulation must be kept at least 3"" away from hous... [Read more]
Design by Toso, Massari &Associaties Semi-recessed, low-voltage design highlighted by a thick, hand poured glass diffuser that provides downlight a nd a decorative element at the ceiling line. The glass trim is available in frosted satin white or clear glass with frosted center. Glass install... [Read more]
Design by Toso, Massari &Associates A starburst pattern in cut glass appears on the surface of this enclosed, semi-recessed downlight. The design provides diffused, low-voltage lighting and the Polar trim is available in clear crystal or frosted white glass. Glass installs with a twist and lo... [Read more]
Design by Toso, Massari &Associates. A semi-recessed, low-voltage fixture providing downward light through an acid-etched, poured glass diffuser available in a crystal or satin glass trim. Provides a narrow to wider beam spread depending on the lamp, as well as a soft pleasant glow. CONSTRUCT... [Read more]
Design by Roberto Pamio. A semi-recessed fixture providing downward light through a translucent etched glass diffuser. Provides a narrow to wide beam spread (depending on lamp), as well as a soft pleasant ceiling glow. CONSTRUCTION: Fully recessed housing equipped with thermal protection and junc... [Read more]
Design by Roberto Pamio A small-scale, semi-recessed fixture providing downward light through an acid-etched, poured glass diffuser available in a wide range of colors. Provides a narrow to wider beam spread, depending on the lamp, as well as a soft pleasant ceiling glow. CONSTRUCTION: Fully rece... [Read more]
Recessed fixture for use in shelving, cabinets and displays. (Not intended for use in walls or ceilings.) Recessed light pictured in gold. Uses MR11 halogen lamp (sold separately). maximum 35W. This fixture consists of a trim with integrated housing - no separate housing is required. Remote trans... [Read more]
Recessed fixture for use in shelving, cabinets and displays. (Not intended for use in walls or ceilings.) Recessed light pictured in brushed nickel. Uses MR11 halogen lamp (sold separately), maximum 20W. This fixture consists of a trim with integrated housing - no separate housing is required. Re... [Read more]
Recessed fixture for use in shelving, cabinets and displays. (Not intended for use in walls or ceilings.) Recessed light in white frosted glass with colored trim. This fixture consists of a trim with integrated housing - no separate housing is required. Uses JC bi-pin halogen lamp, maximum 20W, i... [Read more]
Remodeling housing Non-IC. Integral electronic transformer 120V/12V. 50W maximum. 3"" clearance on all sides must be maintained when insulation is present. Fits in 6"" joist ceilings. J-box and transformer accessible through ceiling opening. Auto-reset electronic transformer w... [Read more]
Remodeling housing Non-IC. Integral magnetic transformer 120V/12V. 50W maximum. 3"" clearance on all sides must be maintained when insulation is present. Fits in 6"" joist ceilings. J-box and transformer accessible through ceiling opening. Rated for chain wiring. Suitable for ... [Read more]
New construction Non-IC housing. Integral electronic transformer 120v/12v. 50 watt maximum. 3"" clearance on all sides must be maintained when insulation is present. Fits in 6"" joist ceilings. J-box and transformer accessible through ceiling opening. Auto-reset electronic tra... [Read more]
